Sony Ericsson Z525i Working Instruction page 69

6. Slide the edge of the camera flex film under the
catch adjacent to the display window and press the
camera flex film down onto its alignment peg.
7. Apply pressure to the flex film around the receiver
opening using the flat end of a pry tool so that the
camera module's flex film will bond to the inner flip
cover.
NOTE!
8. Carefully slide the flex film connection of the
camera module into the slot in the adjacent edge of it
mating connector on the main flex film until the two
tabs on each side of the flex connection are butted
against the edge of the connector.
3/00021-1/FEA 209 544/597 F
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Make sure that the main flex film
connector's black retaining bar is rotated
into a vertical orientation before trying to
insert the camera module's mating flex film.
Working Instruction, Mechanical
69(115)