Antenna Assembly; Antenna Assembly Removal - Sony Ericsson Z525i Working Instruction

4.18 Antenna Assembly

4.18.1

Antenna Assembly Removal

•
Perform sections 2.1.1 - 2.1.3 of the Base Disassembly Procedure
Tools needed to perform the following steps:
NOTE!
1. Locate the antenna assembly in the outer base cover.
2. Lift the antenna assembly out of the outer base cover
and set it aside.
3/00021-1/FEA 209 544/597 F
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Sometimes the antenna assembly remains
attached to the antenna cover when the flip
portion of the phone is detached. If this is
the case, remove the antenna assembly from
the antenna cover by pulling it
perpendicularly away from the surface of
the antenna cover.
Working Instruction, Mechanical
None
58(115)