Volume Key Installation - Sony Ericsson Z525i Working Instruction

4.24.2

Volume Key Installation

If this part is being replaced, a new part should be used in the place of the old part when
performing the following steps.
Tools needed to perform the following steps:
1. Orient the volume key relative to the outer base
cover so that the end of the key with the "+" icon is
adjacent to the camera key location and the icon side
of the key is facing outward.
2. Using tweezers, insert the volume key into its cavity
in the outer base cover.
•
Perform sections 2.2.3 - 2.2.5 the Base Reassembly procedure.
3/00021-1/FEA 209 544/597 F
©
Sony Ericsson Mobile Communications AB
•
ESD tweezers
Step-by-Step Instructions
Working Instruction, Mechanical
72(115)