Working Instruction Repair Instruction Mechanical/3/000 21-1/FEA 209 544/123, Mechanical
4 Reassembly
4.1 Overview
The reassembly is done in the following sequence:
1. Install Camera Flex Assembly
2. Install Circuit Board
3. Install Dome Foil Assembly
4. Install Front Cover
5. Install Battery
6. Install Battery Cover
4.1.1 Camera Flex Assembly Installation
Verify that the camera key is in its slot in the back cover
with the spring facing downward.
Verify that the Walkman key is in its slot in the back cover
with the curved corners towards the frame as shown.
Also verify the Walkman key's two alignment tabs are
positioned in the back cover as shown.
: Preliminary
55(65)
State
Rev 4
© Sony Ericsson Mobile Communications AB