Table of Contents
Advertisement
Replacing an ACX2200 Fiber-Optic Cable
Copyright © 2017, Juniper Networks, Inc.
1.
Disconnecting an ACX2200 Fiber-Optic Cable on page 97
Connecting an ACX2200 Fiber-Optic Cable on page 97
2.
Disconnecting an ACX2200 Fiber-Optic Cable
ACX Series routers have field-replaceable unit (FRU) optical transceivers to which you
can connect fiber-optic cables.
Before you begin disconnecting a fiber-optic cable from an optical transceiver installed
in an ACX Series router, ensure that you have taken the necessary precautions for safe
handling of lasers (see
"Radiation from Open Port Apertures Warning" on page 139
"Laser and LED Safety Guidelines and Warnings" on page
Ensure that you have the following parts and tools available:
A rubber safety cap to cover the transceiver
A rubber safety cap to cover the fiber-optic cable connector
To disconnect a fiber-optic cable from an optical transceiver installed in the router:
Disable the port in which the transceiver is installed by issuing the command:
1.
[edit interfaces]
user@router# set interface-name disable
WARNING:
Do not look directly into a fiber-optic transceiver or into the
ends of fiber-optic cables. Fiber-optic transceivers and fiber-optic cables
connected to transceivers emit laser light that can damage your eyes.
Carefully unplug the fiber-optic cable connector from the transceiver.
2.
Cover the transceiver with a rubber safety cap.
3.
WARNING:
Do not leave a fiber-optic transceiver uncovered except when
inserting or removing a cable. The rubber safety cap keeps the port clean
and prevents accidental exposure to laser light.
Cover the fiber-optic cable connector with the rubber safety cap.
4.
Connecting an ACX2200 Fiber-Optic Cable
ACX Series routers have field-replaceable unit (FRU) optical transceivers to which you
can connect fiber-optic cables.
Chapter 21: Replacing Chassis Components
140).
and
97
Advertisement
Table of Contents
Troubleshooting
