Advertisement
MX150 3D Universal Edge Router Hardware Guide
Connecting Earth Ground to an MX150
Related
Documentation
Connecting AC Power to an MX150
86
To connect earth ground to the MX150:
Connect one end of the grounding cable to a proper earth ground, such as the rack in
1.
which the router is mounted.
Place the grounding lug attached to the grounding cable over the protective earthing
2.
terminal. See
Figure 16 on page
Figure 16: Connecting a Grounding Cable to an MX150
Secure the grounding lug to the protective earthing terminal with the washers and
3.
screws.
Dress the grounding cable and ensure that it does not touch or block access to other
4.
device components.
WARNING:
Ensure that the cable does not drape where people could trip
over it.
Connecting AC Power to an MX150 on page 86
The power supply in an MX150 is located on the rear panel.
Ensure that you have the following parts and tools available:
A power cord appropriate for your geographical location
A power cord retainer clip
CAUTION:
An MX150 gets additional grounding when you plug the power
supply in the device into a grounded AC power outlet by using the AC power
86.
Copyright © 2017, Juniper Networks, Inc.
Advertisement
Chapters
