24
page
–
UDRF01.04GB
1 Engine – 1.9 Control system engine
1.9
Control system engine, description
The engine is controlled by a control system, for which the central
unit is a control unit.
The control unit controls the amount of fuel to the unit injectors by
opening and closing a fuel valve by each injector. The unit injectors
are activated by an extra cam on the camshaft, which presses to-
gether the injector so that the fuel is injected in the cylinder.
The fuel volume is calculated based on the signals from the sensors
on the engine and CAN-message about desired engine rpm (from
throttle pedal via Control unit cab (D790-1)).
Maintenance manual DRF 400–450
https://www.forkliftpdfmanuals.com/
Control system engine