9
1. Outer boom
2. Inner boom
3. Tilt cylinder, right side
4. Mounting attachment
5. Tilt cylinder, left side
page
–
7 Load handling – 7.2.2 Servo filter
1
8
7
Sensor boom angle
See section 8 Control system, group 8.2.1 Overloading system.
7.2.2
Servo filter, changing
Hot, pressurized oil.
Personal injury, burn injury, rash or irritation.
Always depressurize the hydraulic systems before
starting to work on the hydraulic systems. Avoid
skin contact with the oil, use protective gloves.
1 Machine in service position, see section B Safety.
2 Depressurize the hydraulic systems, see section B Safety.
3 Turn the start key to position 0 and turn off the main electric
Maintenance manual DRF 400–450
https://www.forkliftpdfmanuals.com/
8
6
6. Extension cylinder
7. Lift cylinder
8. Mounting, lift cylinder
9. Rear boom mounting
Servo filter
W AR N IN G
power.
2
5
4
3
UDRF01.04GB
7