1. Cover plate for oil filter
2. Filler plug for hydraulic oil
3. Level glass, hydraulic oil
4. Filler plug for hydraulic oil
5. Breather filter, hydraulic oil tank
10 Common hydraulics – 10.6.7 Hydraulic oil filter
3 Remove the cover plates (position 1) over the hydraulic oil fil-
4 Have a receptacle ready to collect any oil spills.
5 Lift up the filter unit and place it in the receptacle. Let the hy-
6 Part the filter unit and remove the filter cartridge. Handle the fil-
7 Clean the filter holder's parts. Be especially thorough with the
8 Fit the new filters and assemble the filter units.
9 Fit the filter units and the cover plates. Tighten the bolts cross-
10 Check the oil level in the hydraulic oil tank. The oil level should
NOTE
Maintenance manual DRF 400–450
https://www.forkliftpdfmanuals.com/
ters.
draulic oil drain.
ter cartridge as environmentally hazardous waste. Note place-
ment of the parts.
magnetic rod.
wise.
be at the top of the level glass. Top up if needed.
The hydraulic oil level is checked with the boom complete-
ly lowered and retracted.
15
UDRF01.04GB