8 Control system – 8.5 Setup
31
8.5
Setup
Settings, general
page
–
Settings are the possibilities to adapt the functions' features to each
unique machine. Settings are performed via menus on the display.
The settings are split up as Initiation and Calibration
Initiation is performed before the machine is used for work. This is
to compensate for mechanical and electrical tolerances (variations
between different machines).
Calibration should be performed for optimal use of important func-
tions. Certain functions require calibration in order to work.
Maintenance manual DRF 400–450
UDRF01.04GB
https://www.forkliftpdfmanuals.com/