Oil Brake System - Kalmar DRF420-60S5 Maintenance Manual

page –
1. Filling point, oil for brake system
2. Breather filter, brake oil tank
4 Brakes – 4.8.14 Oil brake system
4.8.14
Oil brake system, changing
Hot, pressurized oil.
Personal injury, burn injury, rash or irritation.
Always depressurize the hydraulic systems before
starting to work in the hydraulic systems. Avoid
skin contact with the oil, use protective gloves.
1 Machine in service position, see section B Safety.
2 Depressurize the hydraulic and brake systems, see section B
3 Place a receptacle under the brake oil tank. The tank holds ap-
4 Clean the area around the drain plug.
5 Remove the drain plug and drain the tank.
6 Fit the drain plug, use a new gasket washer.
7 Clean the area around the filling point.
8 Remove the filler cap and fill the tank with oil. For volume and
9 Check that the drain plug seals tight.
10 Remove the receptacle. Handle the oil as environmentally haz-
Maintenance manual DRF 400–450
https://www.forkliftpdfmanuals.com/

Oil brake system

W AR N IN G
Safety.
prox. 140 liters.
grade, see section F Technical data.
ardous waste.
17
UDRF01.04GB