Fuel Filter - Kalmar DRF420-60S5 Maintenance Manual

Table of Contents

1 Engine – 1.2.4 Fuel filter

Fuel filter, changing (Volvo engine)

Pay attention to the fire hazard when working on

the fuel system.

Avoid changing the fuel filter when the engine is

Fuel may spill on hot surfaces and may ignite.

Avoid skin contact with fuel, use gloves. Fuel on hands may

cause rashes and irritation.

Do not fill the new fuel filter with fuel before installing. There is

a risk that impurities may enter the fuel system, resulting in

malfunctions or damage.

1 Machine in service position, see section B Safety.

2 Place a receptacle under the fuel filter.

3 Clean the area around the fuel filter.

4 Remove the fuel filter with filter tool.

5 Lubricate the O-ring on the new fuel filter with engine oil.

6 Fit the new fuel filter.

Tighten to contact and then another half to three-quarter turn.

7 Bleed the fuel system, see Fuel system, bleeding (engine alter-

native Volvo) page 9.

8 Turn on the main electrical power and start the engine. Check

that the fuel filter seals tight.

9 Turn off the engine and remove the receptacle. Handle the fuel

as environmentally hazardous and inflammable waste.

Maintenance manual DRF 400–450

https://www.forkliftpdfmanuals.com/

Fuel filter

Table of Contents