50H-Check - Kalmar DRF420-60S5 Maintenance Manual

page –
1 Engine
Leakage check oil, coolant, exhaust system
Coolant level, check
Oil and oil filter, change
Air filter main cartridge, inspection
Air filter safety cartridge, inspection
Drive belt tension, check
Bolted joints, attachments, mountings, hose clamps,
wear and chafing of hoses, cable harnesses, etc.
Fuel pre-filter, drain water
2 Transmission
Leakage check
Oil level, check
Transmission oil filter, changing
3 Driveline/axle
Mounting propeller shaft, check-tightening
Mounting drive axle, inspection
4 Brakes
Power-assisted brake, function check
Parking brake, function check
Leakage check
5 Steering
No action
6 Suspension
Tyre system, check
Wheel nuts, check-tightening
7 Load handling
Hose connections, check-tightening
Chain tension extension (spreader), check and adjust
8 Control system
Check that there are no active error codes
C Preventive maintenance – Preventive maintenance

50h-check

For new machine, checks shall be performed after 50h operating
time. Checks are performed to increase the machine's reliability.
Reference
Section 1 Engine, group 1.7.7 Coolant
Section 1 Engine, group 1.8 Lubrication
Section 1 Engine, group 1.6.1 Air cleaning system
Section 1 Engine, group 1.6.1 Air cleaning system
Section 1 Engine, group 1.7.5 Cooling fan
Section 1 Engine, group 1.2.3 Fuel pre-filter
Section 2 Transmission, group 2.6 Lubrication
Section 2 Transmission, group 2.6 Lubrication
Section 3 Driveline/axle, group 3.2 Propeller shaft
Section 3 Driveline/axle, group 3.3 Drive axle
Section 4 Brakes, group 4.3.4 Accumulator
Section 6 Suspension, group 6.3 Tyre and rim system
Section 6 Suspension, group 6.3 Tyre and rim system
Section 7 Load handling, group 7.5.7 Positioning chains
Section 8 Control system, group 8.3 Error codes
Maintenance manual DRF 400–450
https://www.forkliftpdfmanuals.com/
5
UDRF01.04GB