Oils And Lubricants, Recommendation - Kalmar DRF420-60S5 Maintenance Manual

8
page –
Oil type, quality
1.8 Engine, lubrication system *)
VDS-2 AND ACEA E3
2.6 Transmission, lubrication system
ATF DEXRON III
3.3 Power transmission, drive axle
API GL-5
4 Brakes (UTTO-oil) **)
GM Allison C-4, John Deere J20 C, D, Cat-
epillar TO-4
7 Load handling
Planetary gear hydraulic motor, hypoid oil
API GL-5
Disc brake hydraulic motor
See "10 Common hydraulics" below.
10 Common hydraulics
DIN 51524 Part 3 HVLP
UDRF01.04GB
F Technical data – Technical data
Oils and lubricants,
recommendation
The service intervals indicated by Kalmar Industries in the mainte-
nance manual only apply if oils are selected according to the table
below. The table indicates recommended viscosity for different oil
types and qualities depending on the ambient temperature.
Any deviation from this table must be approved in writing by Kalmar
Industries, and may mean changed service intervals.
°C
-40 -30
°F
-40 -22
Maintenance manual DRF 400–450
https://www.forkliftpdfmanuals.com/
-20 -10 0
-4 +14 +32
SAE 15W40 (engine oil)
SAE 5W30 (engine oil)
DEXRON III
SAE 80W140
SAE 75W90
SAE 5W30 (transmission oil)
SAE 80W140
SAE 75W90
ISO VG 46 HV
ISO VG 32
+10 +20 +30 +40
+50 +68 +86 +104
ISO VG 68