Wiper/Washer System - Kalmar DRF420-60S5 Maintenance Manual

20
page –
E
A
A. Wiper motor front
B. Wiper motor roof
C. Wiper motor rear
D. Washer motor and reservoir
E. Wiper front
UDRF01.04GB
9 Frame, body, cab and accessories – 9.5 Wiper/washer system
9.5
Wiping/cleaning of windows, description
On the cab, there are wipers for front and rear windshields as well
as the roof windows. Its function is to clean the windows and to
maintain good visibility from the cab.
The wiper arm is attached to the wiper motor's shaft over a splined
cone. The shaft is made of hardened steel and the wiper arm's at-
B
tachment is made of mild die cast material.
When installing, it's very important to make sure that the splines are
free from metal filings and similar. Also, the nuts shall be tightened
C
so hard that the splines are pressed into the attachment and act as
a flange. Hold still the wiper arm when installing so that the torque
D isn't transmitted to the motor, which may be damaged (16–20 Nm
tightening torque).
Maintenance manual DRF 400–450
https://www.forkliftpdfmanuals.com/

Wiper/washer system