Parking Brake Unit - Kalmar DRF420-60S5 Maintenance Manual

page –
1
6
1. Brake oil pump
2. Accumulator charge valve
3. Make-contact parking brake (S200)
page –
4 Brakes – 4.5.4 Parking brake unit
Parking brake system, component position
4.5.4
Parking brake unit, checking and adjustment
The machine may start to roll.
Risk of crushing.
Block the wheels so that the machine cannot start
to roll when the parking brake is released.
1 Start the engine and run up hydraulic pressure until the accu-
2 Turn off the engine and turn the start key to position I.
3 Release the parking brake.
4 Check that the parking brake caliper can move on the bracket.
Maintenance manual DRF 400–450
https://www.forkliftpdfmanuals.com/
2
4. Solenoid valve parking brake (Y642)
5.

Parking brake unit

6. Brake oil filter
Parking brake unit
D AN GE R
mulators are fully charged and the accumulator charging valve
switches to cooling.
4
3
5
UDRF01.04GB
11