Reading Out Error Code - Kalmar DRF420-60S5 Maintenance Manual

Table of Contents

D Error codes – Error codes

Reading out error code

In case of an error code, perform the recommended actions ac-

cording to the error code table to find the problem.

Error codes are stored as active or inactive. Active errors are

shown in the error code menu.

Always use error code menus for reading out error codes, oth-

erwise there's a risk of missing error codes.

1 Turn the start key to position I.

Risk of machine damage.

In case of error codes of level "WARNING" and

"STOP", serious machine damage may result if the

engine is started.

Do not start the engine until the cause of the error

code has been identified or repaired.

2 Navigate to the service menu and press Enter.

3 Safety menu is shown. Hold Enter pressed in for at least two

4 The error code list is shown on the display. Active error code is

shown on display where field C shows error code number to-

gether with X(Y). X shows sequence number for shown error

code and (Y) shows number of active error codes.

Scroll between error codes with key 1 and 2 (arrow function).

Error codes disappear from list when the cause has been re-

Maintenance manual DRF 400–450

https://www.forkliftpdfmanuals.com/

Table of Contents