page
–
7 Load handling – 7.7 Tilt
7.7
Tilt, description
The rotation yoke's suspension is hinged and is provided with two
cross-connected hydraulic cylinders that reduce oscillations. The
cylinders are pressurized by the hydraulic system and is connected
with a damping block.
There are four versions of tilt:
•
•
•
•
If the machine is equipped with tilt lock, an electrically controlled
blocking valve is used in the damping block.
If the machine is equipped with controllable tilt, the hydraulic cylin-
ders are supplied from a special section in the control valve on the
attachment.
Maintenance manual DRF 400–450
https://www.forkliftpdfmanuals.com/
Tilt
Damping
Damping with tilt lock (Tilt lock)
Damping with controllable tilt (Controllable tilt)
Damping with controllable tilt and tilt lock
31
UDRF01.04GB