Breather Filter; Brake Oil Filter - Kalmar DRF420-60S5 Maintenance Manual

Table of Contents

1. Filling point, oil for brake system

2. Breather filter, brake oil tank

4 Brakes – 4.8.11 Breather filter

Breather filter, changing

1 Clean the area around the brake tank's breather filter.

2 Remove cover from the filter holder.

3 Remove the old filter cartridge.

4 Clean the filter holder.

5 Fit a new filter cartridge.

6 Refit the cover to the filter holder.

Brake oil filter, changing

Hot, pressurized oil.

Personal injury, burn injury, rash or irritation

Always depressurize the hydraulic systems before

starting to work in the hydraulic systems. Avoid

skin contact with the oil, use protective gloves.

The filter protects the brake system from impurities. It is very

important that new impurities do not enter the brake system

when changing the filter.

The filter holder is heavy, loosen it carefully.

1 Machine in service position, see section B Safety.

2 Depressurize the hydraulic and brake systems, see section B

3 Remove the cover plates from over the engine compartment.

Maintenance manual DRF 400–450

https://www.forkliftpdfmanuals.com/

Breather filter

Remove the screw in the middle and lift away the cover.

Work carefully so that impurities do not enter the tank.

Leave the valve open when changing.

Table of Contents