Lubrication - Kalmar DRF420-60S5 Maintenance Manual

Table of Contents

Drain plug, engine from underneath

Oil filter engine alternative Volvo TWD1240VE

1. By-pass filter

2. Full-flow filter

1 Engine – 1.8 Lubrication

Lubrication system, description

The engine's lubrication system is a completely closed system and

has no connections to the machine.

For position of components, see Engine alternative Volvo, compo-

nent position page 4 or Engine alternative Cummins, component po-

sition page 7.

Oil and oil filter, change (engine alternative

Avoid skin contact with the oil, use protective

Hot oil may cause burns, rashes and irritation!

1 Run the engine until warm.

2 Machine in service position, see section B Safety.

3 Place a receptacle underneath the engine.

4 Remove the drain plug on the engine and drain the engine of oil.

5 Place a receptacle under the oil filters.

6 Clean the area around the oil filters.

7 Remove the oil filters.

8 Install new oil filters.

Lubricate the O-rings on the new filters with engine oil.

Full-flow filter: tighten to contact and then another half to

three-quarter turn.

By-pass filter: tighten to contact and then another three-

quarter to one turn.

9 When the oil has drained, install the oil plug. Torque with max.

Maintenance manual DRF 400–450

https://www.forkliftpdfmanuals.com/

Lubrication

Table of Contents