Tyre And Rim System - Kalmar DRF420-60S5 Maintenance Manual

page –
6 Suspension – 6.3 Tyre and rim system
6.3
Tyre and rim system, safety
Always block the wheels on the side of the axle
where no work is to be done before positioning the
jack. Always secure the jack to prevent it from slid-
ing out of position.
Deflate the tyre before removal. Otherwise the lock
ring and locking clips can loosen and shoot out
when the pressure is changed. With double wheel
fitting both tyres must be deflated!
Do not release air through the valve if the tyre or rim
is damaged. Drill a hole in the tread to release the
air. Damaged tyres may explode.
Never stand directly opposite the tyre when deflat-
ing or inflating. The lock ring and lock lugs may re-
lease and shoot off when the pressure changes.
Never install damaged tyres or rims.
It's prohibited to repair rims with welding.
It's prohibited to operate the machine if one of the
tyres is flat.
Maintenance manual DRF 400–450
https://www.forkliftpdfmanuals.com/

Tyre and rim system

D AN GE R
7
UDRF01.04GB