page
–
page
–
6 Suspension – 6.2.2 Wheel spindle
6.2.2
Wheel spindle bearing, checking
1 Machine in service position, see section B Safety.
2 Carefully pry up the O-ring.
3 Measure with feeler gauge between thrust bearing and thrust
6.2.3
Wheel hub, checking
1 Clean the hub covers on the steering wheels.
2 Remove the hub cover.
3 Wipe grease off the hub cover and the hub nut. Handle as envi-
4 Bend up the lock washer's tabs, remove the lock nut and the
Maintenance manual DRF 400–450
https://www.forkliftpdfmanuals.com/
Wheel spindle
washer. Max. clearance: 1.5 mm.
Wheel hub
ronmentally hazardous waste.
lock washer.
5
UDRF01.04GB