Sideshift Frame - Kalmar DRF420-60S5 Maintenance Manual

16
6.
Solenoid valve tilt (Y6010 and Y6011)
7. Solenoid valve rotation (Y6008 and Y6009)
8. Solenoid valve sideshift (Y6020 and Y6021)
page –
Illustration shows measuring without glide plate.
UDRF01.04GB
7 Load handling – 7.4.6 Sideshift frame
17.
18.
19.
7.4.6
Glide plates sideshift frame, checking
1 Remove cover plate, spacer plate and glide plate.
2 Measure glide plate's thickness.
Thickness should be at least 25 mm.
3 Check the glide plate's clearance by measuring the distance be-
tween the glide plate and the edge for the cover plate.
Clearance should be 1 mm.
Fit/remove spacer plates until the distance is correct.
4 Fit the cover plate.
5 Repeat steps 1–4 on the other glide plates.
Maintenance manual DRF 400–450
https://www.forkliftpdfmanuals.com/
Sensor twistlocks (B7202L/R and B7203L/R)
Lock cylinder twistlocks
Spreader boom

Sideshift frame