Fuel System - Kalmar DRF420-60S5 Maintenance Manual

Table of Contents

1. Filling point, fuel

2. Fuel tank

3. Sensor, fuel level (behind air filter)

1 Engine – 1.2 Fuel system

Maintenance manual DRF 400–450

https://www.forkliftpdfmanuals.com/

Fuel system

Fuel system, description

For position of components, see Engine alternative Volvo, compo-

nent position page 4 or Engine alternative Cummins, component po-

sition page 7.

Fuel system, bleeding (engine alternative

1 Clean the area around the bleeder nipples on the fuel filter's

bracket and cylinder head.

2 Place a receptacle under the fuel filter.

3 Connect a transparent plastic hose to the bleeder nipple on the

filter bracket. Place the other end of the hose in the collection

4 Open the bleeder nipple on the filter bracket.

5 Pump up fuel with the hand pump until clean fuel free of air

bubbles flows out of the hose.

If only the fuel filter has been changed, no further bleeding

is required.

6 Transfer the hose to bleeder nipple on the cylinder head, bleed

in the same way as by the fuel filter.

Table of Contents