Familiarization With Safety Requirements; Electrical Preparations - Agilent Technologies Option H48 Multiport Test Set Z5623A User's And Service Manual

Installation

Familiarization with Safety Requirements

Familiarization with Safety Requirements
This document contains two types of safety notices: Warnings and
Cautions.
A Warning denotes a hazard that may endanger the operator.
A Caution denotes a hazard that may endanger the instrument.
Before proceeding to the Electrical Preparations described in the next
section, turn to Chapter 9, "Safety and Regulatory Information,"
review the Warnings, Cautions, and safety markings that apply to this
instrument.

Electrical Preparations

1. Ensure that the "Electrical Requirements" on page 1-6
2. Verify that the power cable is not damaged and that the power
source outlet provides a protective earth ground contact. Note that
Figure 2-1 on page 2-5
Refer to Figure 2-2 on page 2-6
cord plugs that can be used with your test set.
Cables are available in different lengths. For descriptions and part
numbers of cables other than those described in
Agilent Technologies. Refer to
3. If this product is to be powered by autotransformer, make sure the
common terminal is connected to the neutral (grounded) side of the
ac power supply.
2 -4
depicts only one type of power source outlet.
to see the different types of power
Chapter 10 , "Contacting Agilent."
Agilent Technologies Z5623A Option H48
and
are met.
Figure 2-2, call