Turning On Limit Lines and Limit Testing
Step 1. Click Trace on the menu bar. When the Trace menu appears, scroll
down to the Limit Test... button and click it as shown in
The Limit Test window shown in
Step 2. Click the Limit Test ON and Limit Line ON boxes. The result is
shown in
Figure
Step 3. Click the Hide Table button, then click the OK button.
Saving the Limit Test File
Step 1. Click File on the menu bar. When the File menu appears, scroll down to
the Save As... button and click it. See
Step 2. When the Save As window comes up as shown in
file name. An appropriate file name for this step would be,
"crosstalk_with_no_cal". After entering the file name, record it in
5-3 on page
Recalling the Limit Test File
Recall the limit test file that you have just saved. (Consult
Recall a
Calibration" on
Recall" list.
Agilent Technologies Z5623A Option H48
5-12.
5-7. Next, click the Save button in the Save As window.
page
4-14.) This will put it on the "Quick
Setting Up Limit Testing
Figure 5-9
will pop up.
Figure
5-14.
Figure
Performance Verification
Figure
5-8.
5-15, enter a
Table
"How to
5 -35