Performance Verification
Setting Up Limit Testing
Step 2. When the Save As window comes up as shown in
name that includes the words, "insertion loss," and the date of the
calibration listed in
calibration file is named, "cal_06_17_01", an appropriate file name for
this step would be, "insertion_loss_with_06_17_01_cal". See
5-16. After entering the file name, record it in
Next, click the Save button.
Figure 5-15
"Save As..." Window
Figure 5-16
Specifying The Name Of The Limit Test File For Insertion Loss
5 -16
Table 4-1
on
page
4-13. For example, if the
Agilent Technologies Z5623A Option H48
Figure
5-15, type a file
Figure
Table 5-3 on page
5-7.