Limit Testing For Insertion Loss; Recalling The Calibration; Specifying Measurement Type, Title, And Scaling - Agilent Technologies Option H48 Multiport Test Set Z5623A User's And Service Manual

Performance Verification
Setting Up Limit Testing

Limit Testing for Insertion Loss

Recalling the Calibration

Recall the calibration file listed in Table 4-1 on page 4-13. (Consult
"How to Recall a Calibration" on page 4-14.)

Specifying Measurement Type, Title, and Scaling

Step 1. Click Trace on the menu bar. When the Trace menu appears, scroll
down to the Measure button and pause momentarily. When the
Measure menu appears, scroll down to the S21 button and click it. See
Figure 5-1.
Figure 5-1 Specifying an S Measurement
21
5 -8 Agilent Technologies Z5623A Option H48