Setting Up The Limit Table - Agilent Technologies Option H48 Multiport Test Set Z5623A User's And Service Manual

Performance Verification
Setting Up Limit Testing

Setting Up the Limit Table

Step 1. Click Trace on the menu bar. When the Trace menu appears, scroll
down to the Limit Test... button and click it. See
Figure 5-8 The "Limit Test..." Button
Step 2. When the Limit Test window pops up as shown in
Show Table button, then click the OK button.
Figure 5-9 The "Limit Test" Window
Step 3. When the Limit Table pops up as shown in
from
shown in
5 -12
Table 5-4 to the Limit Table on the network analyzer. The result is
Figure 5-11.
Figure
Figure
Figure 5-10, transfer entries
Agilent Technologies Z5623A Option H48
5-8.
5-9, click the