Caution And Safety Requirements; Safety Information; Safety Summary; Safety Notices - Agilent Technologies N9360A Programming Manual

Caution and Safety Requirements

2

Safety Information

Safety Summary

Safety Notices

C A U T I O N
WA R N I N G
N O T E
2-2
The following general safety precautions must be observed
during all phases of operation of this instrument. Failure to
comply with these precautions or with specific warnings
elsewhere in this manual violates safety standards of design,
manufacture, and intended use of the instrument. Agilent
Technologies, Inc. assumes no liability for the customer's failure
to comply with these requirements.
A CAUTION notice denotes a hazard. It calls attention to an
operating procedure, practice, or the like, that, if not correctly
performed or adhered to, could result in damage to the product or
loss of important data. Do not proceed beyond a CAUTION notice
until the indicated conditions are fully understood and met.
A WARNING notice denotes a hazard. It calls attention to an operating
procedure, practice, or the like that, if not correctly performed or
adhered to, could result in personal injury or death. Do not proceed
beyond a WARNING notice until the indicated conditions are fully
understood and met.
NOTE denotes important information. It calls attention to a procedure,
practice, condition or the like, which is essential to highlight.
N9360A Multi UE Tester CDMA2000 Programming Manual