Measurements Using The Transmission Port - Agilent Technologies Option H48 Multiport Test Set Z5623A User's And Service Manual

Step 7. Command the test set to terminate all of its test ports.
Step 8. Recall the limit test file for return loss (port off). It is listed in
on page 5-7.
Step 9. Read the results of the return loss (port off) test on the screen of the
network analyzer. Record the results in
Step 10. Move the RF cable to the next test port. Repeat
Step 11. Repeat Step 10

Measurements Using The Transmission Port

Step 1. Move the RF cable from the Reflection Port to the Transmission Port.
Move the test port cable back to Test Port 1.
Step 2. Command the test set to connect the test port to the Transmission Port.
Consult Table 3-2 on page 3-9 for a list of commands.
Step 3. Recall the limit test file for insertion loss. It is listed in
page 5-7.
Step 4. Read the results of the insertion loss test on the screen of the network
analyzer. Record the results in
Step 5. Recall the limit test file for return loss (port active). It is listed in
5-3 on page
Step 6. Read the results of the return loss (port active) test on the screen of the
network analyzer. Record the results in
Step 7. Move the RF cable to the next test port. Repeat
Step 8. Repeat Step 7
Agilent Technologies Z5623A Option H48
Verifying Return Loss and Insertion Loss Specifications
until all eight test ports have been measured.
Table
5-7.
until all eight test ports have been measured.
Performance Verification
Table 5-8.
Step 2 through
Table 5-3 on
5-8.
Table 5-8.
Step 2 through
Table 5-3
Step 9.
Table
Step 6.
5 -37