Agilent Technologies Option H48 Multiport Test Set Z5623A User's And Service Manual page 56

Calibrating the Network Analyzer
Performing the Calibration
Or repeat your cal."
Figure 4-10 Cal Wizard Window After Cal Is Complete
Step 14. Get a pen or pencil and a piece of paper.
down a filename.
Step 15. Click the OK button. The calibration will now be saved to disk in the
following directory: C:\Program Files\Agilent\Network
Analyzer\Documents. The file will have a ".cst" suffix.
Step 16. Copy down the name of the file into which the calibration is saved. The
name will appear on the screen for about 10 seconds. Copy the filename,
not the path. (The path is listed in
would be, "at006.cst". Record also the date and time that the calibration
was performed. (The date and time can be used to locate the file in case
the filename you write down is incorrect or incomplete.)
4-6
Step 16 will ask you to write
Step 15 above.) A typical filename
Agilent Technologies Z5623A Option H48