Test Set Familiarization; Front Panel - Agilent Technologies Option H48 Multiport Test Set Z5623A User's And Service Manual

Test Set Familiarization

This section familiarizes the user with various front and rear panel
features of the test set.

Front Panel

Figure 2-5 Front Panel Features
REFLECTION
Port
POWER ON
Switch
POWER ON Switch
The POWER ON Switch turns the AC power to the test set on and off.
The switch is located at the bottom left corner of the front panel. See
Figure
The switch disconnects the mains circuits from the mains supply after
the EMC filters and before other parts of the instrument.
REFLECTION Port, TRANSMISSION Port, and Test Ports 1–8
The REFLECTION Port, the TRANSMISSION Port, and Test Ports 1
through 8 are 50 Ω connectors that are used to connect to the device
under test.
Do not input more than 1 Watt maximum RF+DC to these ports or
CAUTION
damage to the internal RF switches or the analyzer may occur.
The GROUND Connector
The GROUND Connector provides a convenient front panel ground
connection for a standard banana plug.
Agilent Technologies Z5623A Option H48
PORT
CONNECTION
Status LCD
Test Ports 1 through 8
2-5.
Test Set Familiarization
TRANSMISSION
Port
GROUND
Connector
Installation
CONTROL
LINES
Connector
2 -9