Turning On Limit Lines And Limit Testing - Agilent Technologies Option H48 Multiport Test Set Z5623A User's And Service Manual

Figure 5-21 Completed Limit Table for Return Loss (Port Active)

Turning On Limit Lines and Limit Testing

Step 1. Click Trace on the menu bar. When the Trace menu appears, scroll
down to the Limit Test... button and click it as shown in
The Limit Test window shown in
Step 2. Click the Limit Test ON and Limit Line ON boxes. The result is
shown in
Step 3. Click the Hide Table button, then click the OK button. The result is
shown in
measurement of the Electronic Calibration (ECal) module. Notice that
the ECal module does not meet the return loss specifications of the test
set.
Figure 5-22 Return Loss (Port Active) Limit Test On ECal Module
Agilent Technologies Z5623A Option H48
Figure 5-12.
Figure 5-22. The trace shown in the figure is an S
Setting Up Limit Testing
Figure 5-9 will pop up.
Performance Verification
Figure 5-8.
11
5 -21