Saving The Limit Test File; Recalling The Limit Test File - Agilent Technologies Option H48 Multiport Test Set Z5623A User's And Service Manual

Figure 5-24 Completed Limit Table for Return Loss (Port Off)
Step 4. Click Trace on the menu bar. When the Trace menu appears, scroll
down to the Limit Test... button and click it as shown in
The Limit Test window shown in
Step 5. Click the Hide Table button, then click the OK button.

Saving the Limit Test File

Step 1. Click File on the menu bar. When the File menu appears, scroll down to
the Save As... button and click it. See
Step 2. When the Save As window comes up as shown in
name that includes the words, "return loss," the words, "port off ", and
the date of the calibration listed in Table 4-1 on page 4-13. For example,
if the calibration file is named, "cal_06_17_01", an appropriate file
name for this step would be, "return_loss_port_off_with_ 06_17_01_cal".
See
page

Recalling the Limit Test File

Recall the limit test file that you have just saved. (Consult
Recall a
Recall" list.
Agilent Technologies Z5623A Option H48
Figure 5-16. After entering the file name, record it in
5-7. Next, click the Save button.
Calibration" on page
Figure 5-9 will pop up.
Figure 5-14.
Figure
4-14.) This will put it on the "Quick
Performance Verification
Setting Up Limit Testing
Figure 5-8.
5-15, type a file
Table 5-3 on
"How to
5 -25