Restoring The Analyzer To Its Normal Configuration - Agilent Technologies Option H48 Multiport Test Set Z5623A User's And Service Manual

Using the Network Analyzer to Control the Test Set

Restoring the Analyzer to its Normal Configuration

Restoring the Analyzer to its Normal
Configuration
It is a good idea to restore the analyzer to its normal configuration once
you are finished using the analyzer to control the test set. To
accomplish this, use the following procedure:
Step 1. Type q in the command window, then press the <Enter> key. This
terminates the interactive control session on the analyzer.
Step 2. In the analyzer window, click System on the menu bar, then scroll
down to Configure, then click SICL/GPIB.
Step 3. In the SICL/GPIB window, click Talker/Listener and then OK. This
allows other devices to control the analyzer.
3-12 Agilent Technologies Z5623A Option H48