Environmental Preparations
1. Ensure that the
2. If you are installing the test set into a cabinet, ensure there are at
Figure 2-3
Ventilation Clearance Requirements
If the total power dissipated in the cabinet is greater than 800 watts,
CAUTION
forced convection must be used.
Agilent Technologies Z5623A Option H48
"Environmental Requirements" on page 1-6
least two inches of clearance around the sides and back of the test
set and the system cabinet. See
out of the test set must not be restricted. The ambient temperature
(outside the cabinet) must be less than the maximum operating
temperature of the test set by 4 °C for every 100 watts dissipated in
the cabinet.
Environmental Preparations
Figure
2-3. The convection into and
Installation
are met.
2 -7