Using the Network Analyzer to Control the Test Set
Disaster Recovery
Step 4. Click the Hardware tab shown in
Figure
Figure 3-12
"Hardware" Tab In "System Properties" Window
Step 5. Click the Device Manager button. After you do so, there will be a
10-second delay before the "Device Manager" window appears. This
window is shown in
Step 6. Check to see if the "AT-GPIB/TNT" icon is visible as shown in
3-14. If it is not, click on the "National Instruments GPIB Interfaces"
icon as in
3-16
3-12.
Figure 3-13
Figure
3-13.
Figure
3-11. The result is shown in
Click this button.
and
Figure
3-14.
Agilent Technologies Z5623A Option H48
Figure