Mammomat Stand With Separate Rear Side Covers - Siemens MOMMOMAT 1000 Installation And Start-Up Instructions Manual

Final procedures

Mammomat stand with separate rear side covers.

6
11
12
Fig. 1 Mounting the stand covers on a stand with separate rear side covers.
1.
2.
3.
4.
5.
Siemens-Elema AB
Solna, Sweden
1
4
3
7
10
Fit the rear cover (3) to the stand and fasten it with screws (4) and contact washers
(1).
Be careful not to damage the cables at the cable outlet!
Fit left and right front covers (8) to the stand and fasten with screws and contact
washers (9).
Fit left and right rear side covers (5) (6) to the stand and fasten with screws and
contact washers (7).
Fit inner plastic strip (10) to the front and side covers and fasten with screws (11),
eight on either side.
Press on the outer plastic strip (12).
Register 3
5
9
2
8
SP B7-230.033.07
Rev. 03 11.99
Page 3 of 10 Mammomat 1000/3000
SPS-UD Installation and Start-Up
18 - 3
18