Connecting The Incoming Mains To The Stand (400 V, 2-Phase); 400 V 2-Phase Connection - Siemens MOMMOMAT 1000 Installation And Start-Up Instructions Manual

Cable connections

Connecting the incoming mains to the stand (400 V, 2-phase)

400 V 2-phase connection

Fig. 13 Incoming mains cable
1.
2.
3.
GENERATOR
Fig. 14 Incoming mains, 2-phase
Siemens-Elema AB
Solna, Sweden
1
4
Connect the incoming mains cable (1) to X899 (2) in the stand as shown in Fig. 13
and Fig. 14.
Fit plastic tubes (4) on the plates.
Strain-relieve (3) the incoming mains cable.
TWO-PHASE
STAND
208, 230, 240, 277 or 400 VAC
X899
F10
F20
X881
Register 3
1
2
1
3
Incoming mains
P.E N L1 L2 L3
SP B7-230.033.07
Rev. 03 11.99
1
Page 11 of 14 Mammomat 1000/3000
SPS-UD Installation and Start-Up
5 - 11
5
5