Preparatory work
Protective strips for the metal curtain
Fig. 7 Protective strips for the metal curtain
The edges of the metal curtain are very sharp and are therefore provided with protective
strips (1) on delivery. These strips must always be applied onto the edges of the metal
curtain during service and maintenance work.
CAUTION
Holders (2) for storing the protective strips when not in use, are provided on both sides of
the curtain, see Fig. 7.
Siemens-Elema AB
Solna, Sweden
1
2
The protective strips must be removed from the metal curtain
before any vertical adjustment of the swivel-arm system is
performed.
Register 03
SP B7-230.033.07
Rev. 03
Page 5 of 8
11.99
SPS-UD
3 - 5
3
Mammomat 1000/3000
Installation and Start-Up