Rotary Motion - Siemens MOMMOMAT 1000 Installation And Start-Up Instructions Manual

Checking the swivel-arm system

Rotary motion

1.
MAMMOMAT 3000
MAMMOMAT 1000
Fig. 1 Swivel-arm system
2.
3.
Mammomat 1000/3000
Installation and Start-Up
System "OFF".
The rotary motion and the vertical adjustment of the swivel-arm system shall be
blocked.
1
3
3
M A M M O M AT
System "ON", object table installed and projection angle set to minimum with
presetting knob (2/Fig. 1).
Check the rotary motion of the swivel-arm system by pressing buttons (1/Fig. 1)
one by one.
The rotation of the swivel-arm system shall stop when the button is released or
when end position is reached (+135 degrees clockwise and -180 degrees
counterclockwise). The projection angle is shown on the display at the lower part
of the stand.
Register 3
2
4
3
5
1
2
1 0 0 0
4
SP B7-230.033.07
Rev. 03 11.99
1
1
3
Page 1 of 4
SPS-UD
13 - 1
13
13
Siemens-Elema AB
Solna, Sweden