Microprocessors - Siemens MOMMOMAT 1000 Installation And Start-Up Instructions Manual

Checking the microprocessors

Microprocessors

The following LED displays on the processor P.C. boards indicate whether the relevant
microprocessors are operating correctly.
1.
Microprocessors for:
Master: P.c. board D702
IONTOMAT PM: P.c. board D701
Siemens-Elema AB
Solna, Sweden
Mains and system "ON".
The following conditions must be indicated after not more than 15 s.
P.C. board D711:
• V9 "ON" (line voltage on).
• V13 "OFF" (system stand-by).
• V11 "ON" (system on).
• V16 "ON" (intermediate circuit - filament).
Register 3
LED displays
SP B7-230.033.07
Rev. 03 11.99
8
Must be off.
Flashing rapidly.
Must be off.
Must be flashing
(2-3 Hz).
Page 1 of 2 Mammomat 1000/3000
SPS-UD Installation and Start-Up
8 - 1
8