Free-Standing Radiation Shield (Option); Removing The Generator Cover - Siemens MOMMOMAT 1000 Installation And Start-Up Instructions Manual

4 - 2

Free-standing radiation shield (option)

For the installation of the free-standing radiation shield, please refer to separate instruc-
tions enclosed with the radiation shield.

Removing the generator cover

1.
NOTICE
2.
3
Fig. 2 Removing the generator cover
Mammomat 1000/3000
Installation and Start-Up
Installing the generator and the stand
Pry loose the plastic strip (1) and remove the sixteen screws (2), eight on each
side.
Pay special attention to the contact washers (there are four con-
tact washers on either side). They are needed again when reas-
sembling the front cover to establish protective ground
connection and to fulfil EMC (Electro Magnetic Compatibility)
requirements.
Remove the front cover (3) from the generator.
Register 3
2
1
SP B7-230.033.07
Rev. 03 11.99
Page 2 of 6 Siemens-Elema AB
SPS-UD
4
4
Solna, Sweden