Mammomat Stand With Single Rear Cover - Siemens MOMMOMAT 1000 Installation And Start-Up Instructions Manual

18 - 4

Mammomat stand with single rear cover.

1
3
8
9
Fig. 2 Mounting the stand covers on a stand with single rear cover.
The covers are delivered with a protective plastic film, which shall be removed and
discarded.
1.
2.
3.
4.
Mammomat 1000/3000
Installation and Start-Up
4
7
Fit left and right front covers (6) to the stand and fasten with screws and contact
washers (5).
Fit the rear cover (3) to the stand and fasten it with screws (4) and contact washers
(1).
Be careful not to damage the cables at the cable outlet!
Fit inner plastic strip (7) to the front and side covers and fasten with screws (8),
eight on either side.
Press on the outer plastic strip (9).
Register 3
5
2
6
SP B7-230.033.07
Rev. 03 11.99
Final procedures
Page 4 of 10 Siemens-Elema AB
SPS-UD
18
Solna, Sweden