Emc Measures; Emc Measures At The Cable Entry; Fitting The Hose Clamps And Ferrite Sleeves - Siemens MOMMOMAT 1000 Installation And Start-Up Instructions Manual

Cable connections

EMC measures

The following measures are required to ensure electromagnetic compatibility of the equip-
ment.

EMC measures at the cable entry

Fitting the hose clamps and ferrite sleeves

Fig. 1 Cables from the stand
1.
Siemens-Elema AB
Solna, Sweden
Lay the cable harness from the stand to the generator and leave approximately
3 cm of the shielding at the U-bracket, see Fig. 1.
Stow away excessive cable lengths as shown in Fig. 2.
Register 3
3cm
SP B7-230.033.07
Rev. 03 11.99
5
Page 1 of 14 Mammomat 1000/3000
SPS-UD Installation and Start-Up
5 - 1
5
5
5