Aligning The Stand - Siemens MOMMOMAT 1000 Installation And Start-Up Instructions Manual

4 - 6
Fig. 6 Control console on free-standing radiation shield
(option)

Aligning the stand

1.
NOTICE
2.
Fig. 8 Levelling screws
NOTICE
Mammomat 1000/3000
Installation and Start-Up
Installing the generator and the stand
Align the stand vertically by means of the levelling screws (1/Fig. 8) .
For adjustment of the levelling screws, use a ratchet spanner 1/2" with extension
(without socket).
It is important that all six screws bear against the floor to ensure
optimum stability of the stand.
Cover the levelling screws with the cover discs supplied.
If bolting to the floor is required, please refer to Chapter 19 "Bolt-
ing the stand/generator to the floor" on page 19 - 1.
Register 3
Welded nut
M6
Fig. 7 Control console mounted on table
1
SP B7-230.033.07
Rev. 03 11.99
Table top
Page 6 of 6 Siemens-Elema AB
SPS-UD
min. 10 mm –
max. 30 mm
4
Solna, Sweden