Checking The Compression Device - Siemens MOMMOMAT 1000 Installation And Start-Up Instructions Manual

Checking the compression device and OPCOMP

Checking the compression device

2
1
4
Fig. 1 Swivel-arm system
1.
2.
3.
4.
5.
Fig. 2 Foot switch
Siemens-Elema AB
Solna, Sweden
5
Attach compression plate (1/Fig. 1) if not already done.
Check that the compression plate cannot be removed without pressing the
compression plate release button (2/Fig. 1).
Check the function of the knobs for manual compression/decompression (3/Fig.
1).
Place a piece of soft material on the object table, for example a rolled up towel or a
piece of foam-rubber (4/Fig. 1).
Check the function of the foot switch for motorized compression/decompression
(1) and (2) in (Fig. 2).
2
Register 3
3
1
SP B7-230.033.07
Rev. 03 11.99
Page 1 of 4 Mammomat 1000/3000
SPS-UD Installation and Start-Up
15 - 1
15
15