Preparatory work
General
Scope of delivery
The MAMMOMAT is normally packed in one crate and one cardboard box (the number of
packages is dependent on the customer's choice, however):
Crate (length 2140 mm, width 800 mm, height 1375 mm)
The crate contains:
•
Compression plate
•
Stand with X-ray tube assembly and base plate
•
Object table 18 cm x 24 cm (Bucky)
•
External diaphragm
•
Cover panels
•
Installation material
•
Optional: Stanchions for the lead-glass pane (radiation shield)
•
Cable ducts
•
Technical documents
Cardboard box (lenght 1210 mm, width 820 mm, height 700 mm)
The cardboard box contains:
•
Generator with integrated control panel, high-voltage generator and base plate.
•
Optional: Lead-glass pane
•
Optional: Separate control console
Further accessories are packed in a separate cardboard box.
Unpacking
As a general rule, the directional marks on the crates should be observed during trans-
port, storage and unpacking.
The stand crate is bolted together, while the cardboard box is secured with plastic straps.
WARNING
Siemens-Elema AB
Solna, Sweden
Wear safety footwear!
Register 03
SP B7-230.033.07
Rev. 03
Page 1 of 8
11.99
SPS-UD
3 - 1
3
3
3
3
Mammomat 1000/3000
Installation and Start-Up