Installing The Water Pump Cover; Installing The Gear Position Sensor - Husqvarna FC 450 2018 Repair Manual

17 .5.18

Installing the water pump cover

17 .5.19

Installing the gear position sensor

-
Mount the clutch cover.
8
-
Mount screws but do not tighten yet.
Guideline
I I
Screw, clutch cover
0
-
Mount screw but do not tighten yet.
Guideline
I I
Screw, clutch cover
(D
Mount screw and tighten all screws in a crisscross pat­
tern.
Guideline
I I
Screw, clutch cover
-
Remove the special tool.
I
Locking screw (78129032000)
-
Put the water pump cover seal in place.
-
Mount the water pump cover.
O
-
Mount screw with the sealing washer but do not tighten
yet.
Guideline
Screw, water pump
cover
8
-
Mount screw but do not tighten yet.
Guideline
Screw, water M6x25
pump cover
@)
-
Mount screw and tighten all screws in a crisscross pat­
tern.
Guideline
Screw, water pump
cover
-
Position the gear position sensor.
-
Mount and tighten screws
Guideline
Screw, gear M5
position sensor
M6x25 10 Nm (7.4 lbf ft)
M6x55 I 10Nm(7.4Ibf ft)
M6x30 10 Nm (7.4 lbf ft)
(a p. 315)
M6x25 10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
Loctite
M6x55 10 Nm (7.4 lbf ft)
O.
5 Nm (3. 7 lbf ft)
Loctite
ENGINE 17
41
®
243
™
41
®
243
™
41
231